Available
487This product is a white polymer powder that is soluble in cold water. It has good film-forming properties, adhesion, tensile strength and solvent resistance, and can be widely used in cement, gypsum, lime-based dry-mix mortar, and is a green and environmentally friendly product. --Packing specification: 25KG
This product is a white polymer powder that is soluble in cold water. It has good film-forming properties, adhesion, tensile strength and solvent resistance, and can be widely used in cement, gypsum, lime-based dry-mix mortar, and is a green and environmentally friendly product.
--Packing specification: 25KG
--Executive standard: GB/T 12010.2-2010 "Plastic polyvinyl alcohol materials (PVAL) Part 2: Performance determination".
--Product advantages: fast dissolution, low dosage, good effect of improving viscosity strength.
Product Information
Product features: 1. Fast dissolution in cold water, good effect, low addition amount, high transparency of aqueous solution after complete dissolution, no impurities;
2. Provide good bonding performance and improve the strength of mortar;
3. The particle fineness is stable, the product range is complete, and the fluctuation range of screen allowance is 5%.
4. Non-toxic, tasteless, green and environmentally friendly products.
Specifications:
|
|
100 mesh |
150 mesh |
|
appearance |
White powder |
White powder |
|
Bulk density |
500-600 g/l |
450-550 g/l |
|
Viscosity (20°C, 5%) |
30-50 |
30-50 |
|
Solids content |
≥95% |
≥95% |
|
Ash (800°C) |
≤0.5% |
≤0.5% |
|
Average particle size |
100 mesh |
150 mesh |
Applications:
|
apply |
Recommended amount |
remark |
|
Bonding/plastering mortar |
1-2 kg |
Must be used with dispersible latex powders |
|
Interior and exterior wall putty or degreasing coatings |
1-3 kg |
Must be used with dispersible latex powders |
|
tile adhesive or tile grout |
1-3 kg |
Can be used with dispersible polymer powders |
|
Thermal insulation mortar |
2-3 kg |
Can be used with dispersible polymer powders |
|
Eco-friendly glue |
3-5% concentration |
Can be used with hydroxypropyl methylcellulose |
Executive standard: GB/T 12010.2-2010 "Plastic Polyvinyl Alcohol Materials (PVAL) Part 2: Performance Determination".
Storage and transportation: Avoid direct sunlight, should be placed on the pallet and stored off the ground to prevent rainwater from soaking and avoid excessive stacking. The product has a shelf life of 12 months
